THE View II

philadelphia, PA


Owner – The Goldenberg Group

Architect – Niles Bolton Associates

Our Customer – INTECH Construction, LLC

Building Description –  New, mixed use (retail and student housing) development near Temple University – 470,000 square feet  – a 12-story tower connected to a 19-story wing connected by a seven-story bridge – An addition to our previous megapanel job (The View at Montgomery) completed in 2014.

Novinger’s Inc. Work – Fabricate and install three wall panel types: 1) EIFS (exterior insulation and finish systems)  2) ACM (aluminum composite material) and 3) corrugated cladded panels. Panel colors are orange, red, white, and gray. Window receptors were installed in our shop. Our work on this building was finished in early 2020.


 

 

 

225 Grandview  – new facade

camp hill, pa


Owner – Select Capital Commercial Properties Inc.

Architect – Murray Associates Architects

Construction Manager – A. P. Williams Inc.

Building Description – A five floor, 215,000 square foot office building built in the 1980’s – To be completely renovated to Class A commercial office space.

Novinger’s Inc. Work – Remove old glazed curtain wall system down to the structural steel frame. Replace with Kingspan KarrierPanel™ insulated metal panels covered by corrugated metal panels and architectural metal panels. Solar shading louvers were also attached. Renovation goal was to modernize the facade and improve energy efficiency. This extensive renovation challenged our estimating, design, and installation teams, but the finished building looks great and the customer has a beautiful, energy-efficient building ready for new tenants.


 

 

 

 

 

Pennsylvania medical society

mechanicsburg, pa


Owner – Pennsylvania Medical Society

Architect – Crabtree, Rohrbaugh & Associates

Our Customer – Pyramid Construction Services Inc.

Building Description – New construction – three-story – 28,000 square feet – PA Medical Society new headquarters.

Novinger’s Inc. Work – Fabricate and install a rainscreen system consisting of aluminum composite metal (ACM) panels and Cembrit cladding over insulated metal panels (IMP) on steel stud framing. The ACM panels are Kingspan KarrierPanels™, which are specially designed to support a rainscreen system. Cembrit is an engineered fiber cement composite panel reinforced with cellulose fibers for added strength. Most of the panels are now attached to the building frame and caulking to seal the joints is underway. 


 

 

Lincoln Square

philadelphia, PA


Owner – Joint venture of Alterra Property Group and MIS Capital

Architect – BLT Architects

Our Customer – INTECH Construction, LLC

Building Description – New nine-story, mixed use (retail and residential) building – Nearly 300,000 square feet structure attached to a historic brick train depot building.

Novinger’s Inc. Work – Fabricate and install approximately 400 ACM (aluminum composite material) cladded prefabricated exterior wall panels. Panels are beige and light gray. Floor to ceiling windows were installed after the panels were hung and attached to the building frame. We finished this project in late 2018. Leasing of retail space and 322 rental apartments is now underway.


 

UPMC pinnacle harrisburg hospital

harrisburg PA


Owner – University of Pittsburgh Medical Center

Architect – Stantec Architecture and Engineering LLC

Our Customer – Quandel Construction Group, Inc

Building Description – Two new floors added to the Alex Grass Medical Building. The 8th floor is a maternity/postpartum unit and the 9th floor is for a level 3 neonatal intensive care unit.

Novinger’s Inc. Work – Our crews built interior walls and installed drywall and acoustical ceilings. This project had many special features including curved framing, recessed lighting, drop ceiling sections. In addition, our craftsmen installed 3form acrylic resin shaped clouds in the nursing stations and resin trees with leaves in the patient waiting areas. These pictures taken by our foreman Scott Weaver.


 

 

student housing at dickinson college

carlisle, PA


Owner – Dickinson College

Architect – Deborah Berke Partners

Our Customer – Benchmark Construction Company, Inc.

Building Description – New 40,000 square foot, four-story LEED Platinum building.

Novinger’s Inc. Work – Our field crew installed a Knight Wall furring system over block. After that step, we attached prefabricated Rheinzink® wall panels to the furring system on-site. Rheinzink® is a zinc, titanium and copper alloy. The resulting surface is durable, attractive, and low maintenance.


 

 

                                   

HOLLY POINTE COMMONS AT ROWAN UNIVERSITY

glassboro, NJ


Owner – University Student Living

Architect – Erdy McHenry Architecture, LLC

Our Customer – Torcon, Inc.

Building Description –  College residence hall – New, 310,000 square foot circular building  with 4-story and 7-story areas.

Novinger’s Inc. Work – Fabricate and install exterior wall panels consisting of light gauge metal framing with Kingspan KarrierPanel™ insulated metal panels in our shop. The cladding was Kingspan Morin X-12 concealed fastener corrugated panel on the courtyard side and Kingspan Morin standing seam siding on the campus side. It was constructed in combination of four different radii, which complicated the manufacturing and placement of the panels, but resulted in a beautiful finished appearance.